Table of Contents
Advertisement
Changing Cassette Paper Size (Optional Procedure)
The cut sheet option comes with four cassettes (paper trays)
preconfigured for either U.S. or Metric paper sizes. Should the
configurations of these cassettes not meet your needs, you can
reconfigure the cassettes as described below, or you can purchase
additional cassettes.
3
2
1
IPS 10, 11, and 12 = Upper level paper size detector sensors
IPS 20, 21, and 22 = Lower level paper size detector sensors
Legend:
1)
IPS 12/22
2)
IPS 11/21
3)
IPS 10/20
There are three holes in the forward end of the cut sheet paper feed
cassettes. Plastic inserts are to be set in these holes according to
the size of the cut sheet paper loaded in the cassette (as shown in
the table that follows).
When the plastic inserts in the cassette contact the paper size
sensors on the printer, the printer determines that the paper
cassette is in position and identifies the paper size.
35
Advertisement
Table of Contents
