Printronix L5035 Operator's Manual page 106

Printronix l5035: operators manual
Hide thumbs Also See for L5035:
Table of Contents

Advertisement

Chapter 4
General Cleaning
CAUTION
The transfer charger must be in the down position to avoid
scratching the drum. Failure to perform steps 9 and 10 will
damage the drum.
3. Check that the transfer charger is in the down position, and if
not, move it to the down position by rotating the transfer
elevator drive shaft counterclockwise. Watch the charger
movement:
a. If the charger starts to move up, it is already in the down
b. If the charger starts to move down, continue to rotate the
106
position.
drive shaft until the charger reaches the complete down
position.
2
Legend:
1)
Transfer Charger
2)
Transfer Elevator Drive Shaft
1

Advertisement

Table of Contents
loading

Table of Contents