Table of Contents
Advertisement
Major Cleaning
1. Turn the power switch OFF.
2. Open the printer front upper cover. (See page 49.)
3. Open the waste toner recovery unit by pushing downward on
the lever. Pull the green handle and swing the unit outward
away from the printer. (See page 55.)
4. Remove three thumbscrews on the upper inner cover. Then
remove the cover. (See page 58.)
5. Loosen the three thumbscrews securing the drum plate and
remove the drum plate.
6. Remove the cleaning unit by grasping its handle and pulling it
toward you.
IMPORTANT
Do not turn the cleaning unit upside down, or toner might spill.
Cleaning The Cut Sheet Option Rollers
3
Legend:
1)
Thumbscrews (3)
2)
Drum Plate
3)
Cleaning Unit Handle
1
2
115
Advertisement
Table of Contents
