Proximity Sensor; Ambient Light Sensor; Remote Control And Ir Sensor - SMART Board 6000S Series User Manual

CHAPTER 1
WELCOME

Proximity sensor

If the room is empty for a specified period, the display returns to Standby mode.
For more information, see Waking up the display and putting it back to sleep on page 11.

Ambient light sensor

The ambient light sensor is located in the top left corner of the display's frame.
The ambient light sensor detects the room's brightness and adjusts the
brightness of the screen accordingly.
You can enable, disable, and adjust this feature. Refer to the SMART Board
6000S and 6000S Pro series interactive displays installation and maintenance
guide
(smarttech.com/kb/171414) for more information.

Remote control and IR sensor

6 smarttech.com/kb/171415
The proximity sensor is located in the top-left corner of the display's frame.
The proximity sensor can detect people up to 16' (5 m) away when the
display is in Standby mode.
When the proximity sensor detects people in the room, the display turns on
or enters ready mode, depending on how its configured.
You can use the remote control to turn the display on and off, adjust display
settings, and so on.
The display's IR sensor is located in the top-left corner of the display's
frame.
For more information about the remote control, see Using the remote
control on page 14.