Table of Contents
Advertisement
WIFI Dongle Installation (Optional)
WIFI Dongle Installation Instructions
1. Remove the outer panels and safety glass – see manual.
2. Loosen the 2 screws on the IFC cover and remove the cover to access the
IFC.
3. Locate the WIFI dongle connection (X0A) on the left side of the IFC.
(X0A)
4. Line up the tabs on the dongle with the notches on the IFC connection and
insert the cable into the connection.
920-550
5. Locate the dongle holder on the right side of the IFC.
6. Slide the dongle into place with the wires at the top.
7. Reinstall the IFC cover and tighten the 2 screws.
1
CITY SERIES 60
owner's information
City Series CST60E |
17
06.27.22
Advertisement
Table of Contents
