Regency City CST60E Owners & Installation Manual page 14

Direct vent
Table of Contents

Advertisement

owner's information
Smart Thermostat (Transmitter Operation)
The smart thermostat function adjusts the flame height based on the
difference between the set point and the actual room temperatures. As
the room temperature gets closer to the set point, the smart function
will turn the flame down.
To activate this function, press the THERMOSTAT key (fig. 1) until the word
"SMART" appears to the right of the temperature bulb graphic (fig. 11).
To adjust the set temperature, press the UP or DOWN ARROW keys
until the desired temperature is displayed on the transmitter's LCD
screen (fig. 12).
• When smart thermostat is activated, manual flame height adjust-
ment is disabled.
Figure 11: Smart Flame Function
Fan Speed Control**
If the appliance is equipped with a hot air circulating fan, its speed can
be controlled by the Proflame system. To activate this function, use the
MODE key (fig.1) to scroll to the fan control icon (fig. 13). Use the UP/
DOWN ARROW keys (fig.1) to turn on, off, or adjust to one of the fan's
six speeds (fig. 14). A single "beep" confirms reception of the command.
Figure 13
14
| City Series CST60E
Figure 12
Figure 14
Remote Dimmer Control (Light)**
The auxiliary function controls the AUX power outlet by the dimmable
light control. To activate this function, use the MODE key (fig. 1) to scroll
to the AUX icon (fig. 15 & 16).
The intensity of the output can be adjusted through six (6) levels. Use
the UP/DOWN ARROW keys (fig.1) to adjust the output level (fig. 16). A
single "beep" confirms reception of the command.
• This function is available only with the IFC Control Module.
Figure 15
Split Flow control**
The secondary burner is controlled by the split flow. To activate this
function, use the MODE key (fig. 1) to scroll to the SPLIT FLOW mode
icon (fig. 17 & 18).
Pressing the UP ARROW key will activate the secondary burner. Pressing
the DOWN ARROW key will turn the secondary burner off. A single "beep"
confirms the reception of the command.
Figure 17
Figure 16
Figure 18

Advertisement

Table of Contents
loading

This manual is also suitable for:

City cst60e-ngCity cst60e-lp

Table of Contents