Table of Contents
Advertisement
5. Pull the 3 lower glass gasket pads forward to release the glass.
6. Support the glass with one hand and open the 9 lower clamps.
Lower clamps (x9) in open position
7. Locate the 2 levers below the glass and turn them both 90° in a
clockwise direction to lower the firebox glass panel.
direction to lower the firebox glass panel.
Levers to lower firebox glass
Gasket pad
Gasket pad
installation-panels, barriers, faceplates
Push down on levers to lower glass panel
Push down on levers to lower glass panel
8. Carefully lean glass forward onto support.
8. Carefully lean glass forward onto support.
Glass panel--leaning on support
Glass panel--leaning on support
The firebox glass may remain propped on the glass supports to
clean the interior surface. Use care when cleaning -- do not apply
NOTE: The firebox glass may remain propped on the glass supports to clean
excessive force or pressure.
the interior surface. Use care when cleaning -- do not apply excessive force
or pressure.
9. To remove the firebox glass panel from the unit, tilt the glass forward
gently onto the glass supports, grip both suction clamps and lift the glass
9. To remove the firebox glass panel from the unit
up and out of the unit.
glass supports, grip both suction clamps and lift the glass up and out of
the unit.
10. To install glass--reverse steps.
Remove glass panel completely when installing or
10. To install glass--reverse steps.
removing panels, logs, media, etc. to avoid causing
IMPORTANT: Remove glass panel completely when installing or removing panels,
any damage to the glass.
logs, media, etc. to avoid causing any damage to the glass.
: tilt the glass forward gently onto the
City Series CST60E |
69
Advertisement
Table of Contents
