Table of Contents
Advertisement
installer's information
Access Panel Removal
The front access panels (x3) may be removed for ease of hooking
up gas and electrical prior to finishing. Once complete, ensure
that the access panels are reinstalled prior to any finishing.
See locations in the diagram to the right.
• Once the finished material is installed, these access
panels are no longer accessible.
1. Identify the access panel and remove the corresponding
outer trim panel by lifting it up and off (centre panel shown
opposite).
2. From inside the unit, push in the tab to release the access
panel at the top.
3. Push the access panel toward the inside of the unit and
lift up from the bottom to release the bottom tabs. When
clear, lift out of unit.
4. Reverse steps to reinstall access panel.
24
| City Series CST60E
Side A
Gas connection
Aeration adjustment
Electrical
Advertisement
Table of Contents
