Showing Content From A Computer - Polycom V500 Getting Started Manual

Showing Content from a Computer

© Polycom, Inc.
If you have the Polycom People+Content IP option enabled on your V500
system and the software application installed on your computer, you can
show content from a Windows XP or Windows 2000 computer that is
connected to the network. You don't need cables or hardware. All you
need is the IP address of the V500 system. For more information about
enabling People+Content IP on your V500 system, see the Administrator's
Guide for the V500 System.
People + Content IP provides video-only content. No audio is shared.
If your computer is connected to the LAN, you can also share content from
network locations. When you share content from a computer, the far site
sees just what you see on the computer screen.
To install the People+Content IP application on a computer:
1. On a computer with Windows XP or Windows 2000, open a web
browser and go to www.polycom.com.
2. Download and install the People+Content IP application from the
Polycom Resource Center.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS name of the V500 system and click
Connect.
3. Open the content you want to show.
4. Click in People+Content IP.
When you are sending content, the
monitor. Depending on the configuration of your system, you may also see the
content on your monitor.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by
clicking the icon in the task bar.
2. Click in People+Content IP.
3. If others in the conference want to send content using
People+Content IP, click Disconnect to disconnect from the V500
system so that they may connect. Only one computer at a time can
be connected.
S R
HOWING AND
content sharing icon appears on your
C
ECEIVING ONTENT
13