Controlling What You See; Switching Between Full Screen Video And The Home Screen; Showing, Moving, And Turning Off The Pip - Polycom V500 Getting Started Manual

Controlling What You See

Switching Between Full Screen Video and the Home Screen

Showing, Moving, and Turning Off the PIP

© Polycom, Inc.
You can control what you see during a call by switching views and
adjusting the PIP.
Before the call connects, you see the near video in a small window on the
Place a Call screen. When the call connects, the system automatically
shows the video in the whole screen. You can switch back to the home
screen during a call, for example, if you need to adjust a user setting, and
your system is configured to allow you to do so.
To learn about adjusting user settings, see Customizing Your Workspace on page 24.
To see the video in the full screen:
Press Near on the remote control.
To see the home screen:
Press Home on the remote control.
During a call, the Picture-in-Picture (PIP) displays what your camera is
sending to the far site. (This lets you adjust the camera if you need to.) If
the far site shows any type of content, the content appears in the main
part of the screen, and the PIP changes to show the people at the far site.
To show, move, or turn off the PIP during a call:
Press PIP on the remote control to turn the PIP on.
While the PIP has a yellow border, press
to different corners of the screen.
After a brief pause, the PIP border turns blue. Then, press
turn the PIP off.
C W Y
ONTROLLING HAT OU
PIP repeatedly to move it
PIP to
S
EE
9