Showing Content From A Computer Connected Directly To The System; Polycom Hdx 8000 Series, Polycom Hdx 7000 Series, And Polycom Hdx 6000 Series - Polycom HDX Series User Manual

Showing Content from a Computer Connected Directly to the System

© Polycom, Inc.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS host name of your video conferencing
system and the meeting password, if one is set.
3. Click Connect.
4. Open the content you want to show, and click
To stop shown content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Click in People+Content IP or press
computer input.
To keep the call secure, content may be automatically stopped when a participant
joins the call.
Before you show content, check that the computer video is configured to use
one of these supported resolutions and refresh rates.
Polycom HDX 8000 series, Polycom HDX 7000 series, and Polycom HDX 6000
series
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 960
1280 x 1024
1680 x 1050
User's Guide for Polycom HDX Room Systems
in People+Content IP.
Camera and deselect the
Refresh rates (Hz)
60, 72, 75, 85
60, 72, 75
60, 70, 75
50, 60
60
60, 75
60
17