Showing Content; Showing Content From A Computer Connected Directly To The Polycom Hdx System - Polycom HDX 4000 User Manual

User's Guide for Polycom HDX Desktop Systems

Showing Content

Showing Content from a Computer Connected Directly to the
Polycom HDX System
20
Depending on how your system is configured, you might be able to show
content that is stored on a computer. When you show content, the far site can
see you and what you see on the computer screen.
If you have a computer connected to your Polycom HDX 4000 series system,
you can show your computer desktop (content) during a call. When you send
content, the far site can see and hear you, and see and hear what is on your
computer screen.
Before you show content, check that the computer video is configured to use
one of these supported resolutions and refresh rates.
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 960
1280 x 1024
1680 x 1050 – Recommended for HDX
4000 systems with Hardware Version A
1600 x 900 – Recommended for HDX
4000 systems with Hardware Version C
and HDX 4000 systems with Hardware
Version A that have been upgraded to
Monitor Hardware Version B
1920 x 1080– Recommended for
Polycom HDX 4500 systems only
To start sending content, select one of the following options:
— Press the
When you are sending content, the Send Computer button is lit.
— Press Content on the remote control.
Refresh Rates (Hz)
60, 72, 75, 85
60, 72, 75
60, 70, 75
50, 60
60
60, 75
60
60
60
Send Computer button on the keypad.
Polycom, Inc.