Placing And Ending An Audio-Only Call - Polycom V500 Getting Started Manual

Placing and Ending an Audio-only Call

Placing an Audio-only Call
Ending an Audio-only Call
© Polycom, Inc.
If you have an ISDN line connected to your V500, you can use your
system to make audio-only calls in addition to using your system to place
video calls.
To place an audio-only call from your system:
1. On the home screen, enter the number you want to call.
To place a call within your PBX system, enter the last four
digits of the number.
To delete a digit, press
2. Select Call Type and press
3. Select Voice over ISDN.
4. Press Call to place the call.
To hang up from an audio-only call:
Press Hang Up on the remote control.
If the person on the telephone hangs up first, you need to disconnect the call from
the V500 system, just as you would hang up a telephone receiver in a regular phone
call.
C
ALLING AND
Delete on the remote control.
on the remote control.
A
NSWERING
7