Showing Content From A Computer Connected Directly To; Realpresence Group Systems - Polycom RealPresence Group 300 User Manual

User's Guide for the Polycom RealPresence Group Series

Showing Content from a Computer Connected Directly to

RealPresence Group Systems

22
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
Click in People+Content IP.
2
3 Click Disconnect.
Before you show content, check that the computer video output is configured
to use one of these supported resolutions and refresh rates. For best video
quality, use refresh rates of 60 Hz or less.
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
The way you set the resolution and refresh rate differs, depending on the type
of operating system you have. Check your computer's manual or help topics for
the appropriate steps.
To set up your RealPresence Group system to show content:
>> Make sure the computer is powered on and connected to the RealPresence
Group system. You can connect a computer to the HDMI or VGA video
input.
Refresh rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
60
60, 75, 85
60
60
60
60
Polycom, Inc.