Customizing Your Workspace; Specifying When To Display The Pip - Polycom V500 Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Customizing Your Workspace

Specifying When to Display the PIP

24
V500 S
YSTEM
You can customize what you see on the screen, depending on how your
system is configured. You can change these options before you place a call
and when the system is in a call.
Your system may be configured with specific default behavior for the PIP
in calls. Depending on your system configuration, you may be able to
show, move, or hide the PIP as needed after a call connects.
To specify when to display the PIP:
1. Select System from the home screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to PIP, press
one of these settings:
Select this setting...
Auto
On
Off
5. Press Home to save your change and return to the home
screen.
Enter on the remote control, and select
To show the PIP...
On connection and when you pick up the
remote.
On connection and during the call.
Only when you press
control.
www.polycom.com/videodocumentation
PIP on the remote