Central remote controller
Changing the Energy Saving Schedule (Energy Saving Schedule)
Changing the details of the Energy Saving Schedule settings
●
NOTE
The operation continues at the last set save rate unless you change to "Release" in "Energy saving operation" or "Energy Saving
Schedule".
1
In the "Settings Menu" screen, select "Schedule settings" and
then press [
] (Confirm).
The "Schedule settings" screen is displayed.
2
Select "Energy Saving Schedule" using [∧] and [∨], and then
press [
] (Confirm).
The "Select Zone" screen is displayed.
• The zones for which no air conditioner is registered are not
displayed.
3
Select the zone to set using [<], [∧], [∨], and [>], and then press
[
] (Confirm).
The "Weekly Schedule" screen is displayed.
4
Select the day of week to set using [<] and [>] and the
schedule to set using [∧] and [∨], and then press [
(Confirm).
The "Schedule editing" screen is displayed.
• No more than 8 schedules can be set a day.
5
Move the cursor using [<] and [>], and set the time using [∧]
and [∨].
• If the time is not set, you cannot set the save rate.
6
Change the save rate using [∧] and [∨], and then press [
(Confirm).
The "Weekly Schedule" screen is displayed again, with the set
schedule added to the list.
Owner's Manual
]
]
-EN
29