Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for
DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove lock ring
–
2
Remove screw
–
3
Remove screw
F02205-10
–
Take off the brake caliper.
Info
Do not kink or damage the brake line.
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Allow the brake caliper and the brake line to hang loosely to the
side.
F02207-10
–
Check the brake discs. (
–
Remove screws
–
6
Take off cover
–
Press the brake piston back to its basic position and make sure that
no brake fluid overflows from the brake fluid reservoir, extract brake
fluid if necessary.
F03004-11
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in the
holding spring.
–
Position the brake caliper on the brake disc.
The brake linings are correctly positioned.
F02207-11
p. 37)
1
.
.
4
and screw
.
p. 62)
5
.
7
with washer
and membrane
BRAKE SYSTEM 12
8
.
73