GAS GAS MC 50 2022 Owner's Manual page 69

–
Remove lock ring
–
7
Remove screw
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
Warning
Danger of accidents Brake linings which have not been
approved alter the braking efficiency.
Not all brake linings are tested and approved for GASGAS
motorcycles. The structure and friction coefficient of the
brake linings, and thus their brake power, may vary greatly
from that of original brake linings.
If brake linings are used that differ from the original
equipment, compliance with the original homologation
is not guaranteed. In this case, the vehicle no longer
corresponds to its condition at delivery and the
manufacturer warranty shall be void.
–
Only use brake linings approved and recommended by
F03001-10 GASGAS Motorcycles.
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in the
holding spring.
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when neces-
sary.
–
Check the brake discs. (
–
Position the brake caliper.
–
4
Mount screw
Guideline
Screw, front
brake caliper
–
5
Mount screw
Guideline
Screw, front
F03000-11
brake caliper
6
.
.
7
.
M5 8 Nm (5.9 lbf ft)
6
.
p. 62)
, but do not tighten yet.
M8x60 20 Nm (14.8 lbf ft)
, but do not tighten yet.
M8x40 20 Nm (14.8 lbf ft)
BRAKE SYSTEM 12
Loctite ® 243™
Loctite ® 243™
67