GAS GAS MC 50 2022 Owner's Manual page 100

18 CLEANING, CARE
98
–
Push back the protection caps on the handlebar controls to allow
water to evaporate.
–
After the motorcycle has cooled down, lubricate all moving parts
and pivot points.
–
Clean the chain. ( p. 54)
–
Treat bare metal (except for brake discs and the exhaust system)
with a corrosion inhibitor.
Preserving materials for paints, metal and rubber (
–
Treat all plastic parts and powder-coated parts with a mild cleaning
and care product.
Special cleaner for glossy and matte paint finishes, metal and
plastic surfaces ( p. 111)
p. 110)