GAS GAS MC 50 2022 Owner's Manual page 76

12 BRAKE SYSTEM
74
–
Mount and tighten screw
Guideline
Screw, rear brake
caliper
–
Mount and tighten screw
Guideline
Screw, rear brake
caliper
F02206-10
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
–
Check the brake discs. (
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
–
Add brake fluid up to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position cover with washer and membrane.
–
Mount and tighten the screws.
H01654-10
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. (
3
.
M6x16 10 Nm (7.4 lbf ft)
4
.
M6x40 10 Nm (7.4 lbf ft)
2
.
M5 8 Nm (5.9 lbf ft)
1
.
p. 62)
A
.
10 mm (0.39 in)
p. 108)
p. 37)
®
Loctite 243™
Loctite ® 243™