GAS GAS MC 50 2022 Owner's Manual page 45

–
Tighten screws
Guideline
Screw, bottom triple
clamp
F03024-10
–
4
Tighten nut
Guideline
Nut, steering head
–
Position the fuel tank breather
F03027-10
–
8
Tighten screw
Guideline
Screw, top triple clamp
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
–
Tighten screws
Guideline
Screw, top triple clamp
F03028-10
–
Position the brake caliper, mount screw
Guideline
Screw, front
brake caliper
–
Mount and tighten screw
Guideline
Screw, front
brake caliper
F03021-11
–
Position the brake line and the clamp. Mount and tighten
bm
screws .
Guideline
Screw, brake hose
bracket
Finishing work
–
Check that the wiring harness, throttle cables, brake line have the
necessary freedom of movement and are correctly routed.
–
Install the front fender. (
–
Install the start number plate. (
–
Install the front wheel.
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 11
6
.
M8 15 Nm (11.1 lbf ft)
.
M20x1.5 10 Nm (7.4 lbf ft)
7
in the steering stem.
.
M8 20 Nm (14.8 lbf ft)
9
.
M8 20 Nm (14.8 lbf ft)
bk
, and tighten.
M8x60 20 Nm (14.8 lbf ft)
bl
.
M8x40 20 Nm (14.8 lbf ft)
EJOT PT 2 Nm (1.5 lbf ft)
K60x20-Z
p. 48)
p. 47)
( p. 75)
p. 44)
Loctite ® 243™
Loctite ® 243™
p. 37)
43