–
Check the chain sliding guard for wear.
»
If the lower edge of the chain pins is in line with, or below, the
chain sliding guard:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Remaining screws,
chassis
F02199-10
–
Check the chain sliding piece for wear.
»
If the lower edge of the chain pins is in line with or below the
chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
»
If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding
piece
F02200-10
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
»
If the light part of the chain guide is worn:
–
Change the chain guide.
400985-01
SERVICE WORK ON THE CHASSIS 11
M6
M8
10 Nm (7.4 lbf ft)
15 Nm (11.1 lbf ft)
57