17 CARBURETOR
96
–
Position the throttle slide and throttle slide cover.
–
Tighten throttle slide cover
–
Measure the distance between the carburetor housing and the
throttle slide cover.
»
A
Distance
If the specified value is not reached:
–
Screw on the throttle slide cover correctly.
F03015-10
–
Mount the carburetor.
–
Mount the engine breather hose and position clamp
F03012-12
–
Mount the inlet sleeve.
–
Position and tighten hose clip
Guideline
Hose clip, carburetor
–
Position and tighten hose clip
Guideline
Hose clip, carburetor
F03011-11
–
Mount fuel hose
F02979-12
Finishing work
–
Check the play in the throttle cable. (
–
Carburetor – adjust the idle speed.
2
hand-tight.
: ≤ 3 mm (≤ 0.12 in)
4
.
-
2.8 Nm (2.07 lbf ft)
5
.
-
2.8 Nm (2.07 lbf ft)
6
.
p. 86)
(
p. 87)
3
.