Ida Start-Up - Nortel Communication Server 1000 Manual

Step Action
6 Check to assure the following IDA cables
are connected correctly:
•
PRI to DCHI cable
• 2Mb/s transmission cable from
NT8D72BA to DSX (the digital cross
connect)

IDA start-up

Table 73 "DASS2 start-up" (page 169)
the PRI and DCHI from a disabled to an operational state.
Table 73
DASS2 start-up
Action
Step
1 Check the status of PRI cards.
2
Enable PRI using:
LD 75
ENL DDCS l(loop)
3 Enable the DCHI:
LD 75
ENL DDSL n
Copyright © 2007, Nortel Networks
.
Response
Response
The PRI shown is disabled.
ENBL
ENBL IDLE
(DCHI enabled, but all channels are
disabled)
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 02.01 Standard
Release 5.5 7 December 2007
IDA start-up 169
provides the steps required to take