Nortel Communication Server 1000 Manual page 29

Table 7
Application of an alternative route list associated with ARRN
RLI
104
Special Number programming at node B
On node B, Special Number "5" is programmed as shown in
"Application of Special Number 5 at node B" (page
Table 8
Application of Special Number 5 at node B
SPN
5
If the number 5542xx is dialed by an extension on node B, this must be
recognized as the DID number of extension 32xx, local to node B. An SDRR
table with an LDID (Local DID) entry "542" must be created for SPN "5".
If the number 5541xx is dialed by an extension on node B, this must be
recognized as the DID number of extension 41xx, local to node A. While the
call should still be routed to node A, digit manipulation is required so that the
call does not tandem through node A and out to the PSTN. An SDRR entry
of type DID can be added to the table, for digit sequence "541" which will
provide a unique digit manipulation for this digit sequence, to turn the digits
into the internal DN of the extension dialed. Refer to
an alternative route list index for digit sequence 541" (page
Table 9
Application of an alternative route list index for digit sequence 541
SPN Digit Sequence
5
When the 5541xx special number is dialed from node B, the digits received
at node A will be translated using to the coordinated dialing plan feature.
Figure 7 "Digit conversion, node A and node B" (page 30)
sequence of digit conversion.
Copyright © 2007, Nortel Networks
.
Route No
RLI
203
Type
541
542 LDID
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 02.01 Standard
Release 5.5 7 December 2007
Numbering plans for DASS2 routes 29
1
PBX B
Route
1
Delete
DID 2
3
Digit Manipulation
Delete Insert
3 593
Table 8
29).
DMI
Delete Insert
-
Table 9 "Application of
29).
DMI
Insert
8
3
shows the full
89
RLI
-na-
-na-