Nortel Communication Server 1000 Manual page 120

120 DCHI installation and removal
Figure 36
NT5K35 DIP switch settings
Jumper settings
The NT5K35 has two banks of option straps, one for each port. These
select between DCE and DTE operation and whether the signaling interface
is RS232 (asynchronous) or RS422 (DASS2).
strap settings" (page 121)
card.
Copyright © 2007, Nortel Networks
.
shows the jumper strap settings on the NT5K35
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 02.01 Standard
Release 5.5 7 December 2007
Figure 37 "NT5K35 Jumper