Additional Components for Windows NT
These are additional DOME software components that run on
Windows NT systems using the Md4/PCV board.
Dynamic-link library
The mdpcint.dll dynamic-link library (DLL) is a group of
functions that can link to DOME applications, such as the DOME
Image-Processing Library and Calibration TQA.
The DLL installs automatically when you load the Windows NT
4.0 driver.
DIMPL library
The DOME Image-Processing Library (DIMPL) provides a group
of functions for image manipulation. The DIMPL library uses the
DirectDraw facilities in the Windows NT 4.0 operating system
and works cooperatively with the DOME driver.
DimplX control
The DimplX control is the ActiveX interface to the DIMPL library.
It provides an easy-to-use interface to the powerful DIMPL func-
tions. It also uses the DirectDraw facilities in the Windows NT 4.0
operating system.
Additional Components for Windows NT | 39