Setting Palette Options; Setting Display Preferences; Setting Driver Options - Planar Dome M2/PCI Installation Manual

20 | Windows 2000 Driver
To set the custom mode
See Appendix A, "Customizing sync parameters on
Windows 2000" on page 73.

Setting palette options

See Appendix B, "Palette Options" on page 81.

Setting display preferences

Select one of these options from the Monitor Preferences field
of the DOME tab.
• Sync on Green
• Composite Sync
• Pedestal
Refer to your display documentation for more information on
display preferences.

Setting driver options

You have these two choices for setting driver options:
• Disable DirectDraw
• Single-channel Grayscale
The Disable DirectDraw option has specific conditions that
may affect your display. Be sure to read the next sections
before you choose this option.
To disable DirectDraw
In the Driver Options field of the DOME tab, select
Disable DirectDraw. Then click Apply or OK.