Start-Up - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual
The Druck DPI 620 Genii can be used to communicate with
other devices that use a HART®application as follows:
• One HART device (a master device) starts and controls
the communications
• The field device (a slave device) uses each command
from the master device to make a change and/or send
data back
• Two master devices are permitted: a primary master
(usually the main control and monitor system), and a
secondary master (usually a hand-held communicator)
• The Druck DPI 620 Genii operates as a secondary
master
6.2

Start-up

In the start-up procedure the Druck DPI 620 Genii displays
"HART® SDC Loading"
06 June 2013
Druck DPI620 Genii
Page 90 of 179