User Manual
• The power supply input range is 100 – 240Vac, 50 to
60Hz, 250mA, installation category CAT I
• Position the power supply so not to obstruct the supply
disconnecting device.
• Note that the operating and storage temperature range
of the mains PSU does not match that of the DPI620.
Mains PSU operating temperature range 0°C to +40°C,
storage temperature range -40°C to +70°C
• To make sure the display shows the correct data,
disconnect the test leads before power is set to on or
changing to another measure or source function
• Make sure the power is OFF before connecting or
disconnecting the probe
• Keep the probe and leads free from all contaminants
06 June 2013
Druck DPI620 Genii
Page 14 of 179
Need help?
Do you have a question about the Measurement & Control Druck DPI 620 Genii and is the answer not in the manual?