GE Measurement & Control Druck DPI 620 Genii User Manual page 68

User Manual
menus to set-up the necessary operations
1. Align the two slots on the calibrator with the two posts
on the module carrier.
2. When the posts are fully engaged in the slots, tighten the
two screws hand-tight.
3. Attach one or two PM 620 modules with the correct
range and type.
4. Tighten each PM 620 modules hand-tight only.
5. When the symbol flashes at the top of the display, there
is communication between the module and the
calibrator.
06 June 2013
Druck DPI620 Genii
Page 68 of 179