Pressure Indicator Operation (Mc620) - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual
3

Pressure Indicator Operation (MC620)

This section gives examples of how to connect and use the
instrument to measure pressure with the module carrier (MC
620) and the applicable pressure modules (PM 620).
To make a fully integrated pressure calibrator instrument
with one of the three Pressure Stations, refer to the User
Manual for the PV62x Series of Pressure Stations, K0457
Do not use a damaged instrument
1. Pressure connection (G1/8 or 1/8 NPT) to attach external
pressure equipment
2. Pressure and electrical connections for a pressure
module (PM 620). These are self- sealing pressure
connections
3. Two screws to attach the calibrator (Druck DPI 620 Genii)
4. Electrical connections for the calibrator (Druck DPI 620
Genii)
5. Pressure module (PM 620) with a pressure connection,
reference port (a) and a label
06 June 2013
Druck DPI620 Genii
Page 65 of 179