User Manual
4.2
Operation
To begin data logging tap 'Start logging' button.
In 'Periodic' mode an icon flashes in the status bar each time
a data point is logged.
In 'Key Press' mode tap the Log Button to log a data point.
To stop data logging the tap Stop.
4.3
File Review
Tap the Recall button in the Data logging menu to see the
Log playback menu
To view a data file point by point do the following:
1. Tap the Filename button to display the list of data
2. Select the file to be displayed
3. Tap to see the data display
4. To step the display one data point, tap the Next Log
Note: The data point number sequence is displayed in
the top right-hand corner (e.g. 4 of 100)
5. To go back one data point, press the Previous Log
7. Exit the screen
06 June 2013
files
button
button
Druck DPI620 Genii
Page 77 of 179