Around The Engine; Engine Oil - Baroness GM2810A Owner's Operating Manual

Around The Engine

Inspection of Engine-Associated Parts
Caution
Implement after the engine and DPF etc. have
well cooled down.
Otherwise, you may suffer burns.
1. Check for damages and dirt.
2. Check the mount for looseness and cracks.
3. Check for liquid leakage.
4. Check on and around the DPF for grass
clippings and flammable materials.
Cleaning Engine-Associated Parts
Caution
Implement after the engine and DPF etc. have
well cooled down.
Otherwise, you may suffer burns.
1. Clean clippings and remove dirt.
2. Blow compressed air to clean any grass or
flammable materials that may be attached
on or around the DPF.
Remove clippings and dust in a gap
thoroughly due to the intricately shaped
engine.

Engine Oil

Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
1. Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
Inspection and Cleaning
Handling Instructions
2. Position the machine so that the engine will
be level, and then insert the oil level gauge
all the way to check the oil level.
1
Inspection of Engine Oil_001
1 Oil gauge
3. The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
1
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
GM2810A
bgmiun-013
2
3
rnr453-002
Page 5-11