Oil Cooler; Hydraulic Oil - Baroness GM2810A Owner's Operating Manual

GM2810A
Handling Instructions
[2] Open the reserve tank cap, and then
supply clean water up to the "FULL"
mark.
1
Coolant Supply_002
1

Oil Cooler

Inspection of Oil Cooler
1. Make sure that there is no damage to the
oil cooler.
2. Make sure that the oil cooler is not
contaminated.
Cleaning of Oil Cooler
Important
An unclean oil cooler may cause malfunction
of the hydraulic system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the oil cooler has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
1. Open the radiator cover.
Page 5-6
ouuoov-014
Radiator cap
2. Unlock the rubber catches on the left and
right of the oil cooler, and then tilt the oil
cooler.
3
2
Cleaning of Oil Cooler_001
1
2
3
3. Carefully clean the front and back of the oil
cooler with water or compressed air.

Hydraulic Oil

Inspection of Hydraulic Oil
The oil gauge is on the side of the hydraulic
tank.
1. Raise the mower decks and maintain that
position on a level surface.
2. Make sure that the oil level is at the middle
of the oil gauge.
Inspection of Hydraulic Oil_001
1
3. Check underneath the machine for oil
leakage.
2
1
C30D7599
Oil cooler
Rubber catch
Radiator
1
Oil gauge
Inspection and Cleaning
olekci-005