1. Manuals
  2. Brands
  3. Baroness Manuals
  4. Lawn Mower
  5. LM54GB
  6. Owner's manual

Baroness LM54GB Owner's Manual

Swing mower saxon 2005 model
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LM54GB GBF
SWING MOWER
LAWN MOWER
Owner's handling manual & parts catalogue for saxon 2005 model
"Required reading" Before using the machine please ensure that you have read this
manual and the operating and instruction manual for the engine.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM54GB and is the answer not in the manual?

Questions and answers

Related Manuals for Baroness LM54GB

Summary of Contents for Baroness LM54GB

  • Page 1 LM54GB GBF SWING MOWER LAWN MOWER Owner’s handling manual & parts catalogue for saxon 2005 model "Required reading" Before using the machine please ensure that you have read this manual and the operating and instruction manual for the engine.

  • Page 2: Table Of Contents

    6. Blade engagement Features of LM54GB ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・...

  • Page 3: Safety Warning

    Safety Warning Introduction Thank you for buying a Baroness lawn mower, the LM54GB or LM54GBF swing mower. Warning marks and signs have been attached to this machine to ensure that you can This operating and instruction manual describes the correct methods of handling, operate it safely.

  • Page 4: Safety Precautions

    −2− 4) When lending the machine to other people Safety precautions Caution The lawn mower has a rotating blade reel cylinder (sharp blade), and the safety of If you lend the machine to a person who has no knowledge about the safety precautions or handling procedures described in the operation manual, an unexpected accident may operation is subject to the place of use, obstacles, lawn conditions, and many other factors.
  • Page 5 • Operate the machine anywhere at a speed that will allow the machine to 10) Storage stop immediately in an emergency. • Wait until the engine cools when covering the machine with a sheet, etc. Do not start the machine or operate the handle suddenly. Be sure to •...
  • Page 6 −4− Names of the various sections and locations of the warning marks Code No. Part Name Remark Code No. Part Name Remark Ｋ４２０１０００４２０ Saxon mark 106 Ｋ４２０５００１２８０ Danger mark ＬＭ５４ＧＢ−１５０６Ｚ０ Ｋ４２０９０００３７０ Type mark 10 hour greasing mark Ｋ４２０５００１３００ Ｋ４２０３０００９７０ Engine oil warning mark Brake mark Ｋ４２０５００１３３０...

  • Page 7: Features Of Lm54Gb

    Features of LM54GB Handling instructions • The travel motion section and cutting unit can tilt independently, and sloping ground and 1. Assembly and adjustment of the body undulations can be cut smoothly, even on hard and difficult greens. • Because the cutting unit and grass collection section are separate the greens can be cut uniformly.

  • Page 8: Confirmation Of The Operation Of Clutch Lever And Brake Lever

    −6− 2. Inspection before use Confirmation of the operation of clutch lever and brake lever Check that the clutch and brake operate completely. Greasing When adjustment is necessary, make adjustment according to "5-8. [important] Adjustment of engine clutch section." The transmission and intermediate transmission gears are equipped with needle bearings.

  • Page 9: Engine Starting Sequence

    4. Engine starting sequence Stopping the engine Caution Remember how to stop the engine when emergency. Warning Before starting engine 1) Do not grip the main clutch lever. • Carefully read gasoline engine operation manual before starting the engine. The handle cover is equipped with an engine switch.

  • Page 10: Machine Operation

    −8− 〈Unit clutch lever〉 5. Machine operation Unit clutch lever The lever is at the top of the left frame. When the lever is in the "ON" position, the Danger Before operation transmission case supplies power into the unit. • Check that each portion - especially the brake and clutch - operate satisfactorily before Position the lever in the "OFF"...

  • Page 11: Adjustment Of Handle Height

    Clutch wire adjusting nut Adjustment of handle height Move the securing bolt up and down in the slot of the handle adjuster, which is securing the handle to the frame, in order to adjust the height of the handle according to the operator's Clearance working position.

  • Page 12: Important] Greasing

    (mm) K2511000270 1.5 bottom blade 55G Every 50 hours Standard Option K2511000280 2 bottom blade 55G blade Every 10 hours LM54GB K2511000050 2.5 bottom blade 55G Standard Tipped blade K2510000060 3 bottom blade 62.5-559 Option Standard blade Blade thickness Tipped blade...

  • Page 13: Blade Engagement

    The minimum mowing height is the height on the average condition green. In the case 6. Blade engagement that the undulation of green is substantial, set the mowing height higher lest the lawn be Check that the engine is at rest before making adjustment. shaved.

  • Page 14: Important] Engagement

    −12− Caution Do not wet the air cleaner and the electrical components when cleaning. [IMPORTANT] Cam adjustment Turn the cam bush on both sides of the bottom blade, and the blade will be raised and lowered within a maximum range of 0.3 mm. The above method is used when the edges of the blade reel cylinder and bottom blade are not in parallel.

  • Page 15: Attaching/Detaching The Bottom Blade Base

    Attaching/detaching the bottom blade base Machine number plate attaching position After removing the mower unit from the main body, detach the bed knife mount. The serial number is marked on the machine number plate. Remove the rear roller ass'y first, then remove the cutter pin R, and loosen 10 blade adjusting nut P1 to remove.

  • Page 16: Long-Term Storage

    −14− 7. Long-term storage Precautions for engine operation Caution 1) For the engine, refer to the engine operation manual. For the engine, refer to the engine operation manual 2) Cylindrically grind the blade reel cylinder every six months. 1) Use gasoline for automobiles as the fuel of the engine. 3) Replace the bearing (30204JRP6) and seal on both sides of the blade reel cylinder every 2) Completely change engine oil when the machine has been used for season.

  • Page 17: Maintenance Schedule

    9. Maintenance Schedule Engine Maintenance Before use Every 8 hr Every 10 hr Every 50 hr Clearing of each part/inspection of tightening Inspection and addition of fuel Inspection and cleaning of air cleaner Inspection and addition of engine oil only after the Engine oil change initial operation Main unit...
  • Page 18 −16−...

  • Page 19: Parts Catalogue

    SWING MOWER LM54GB GBF PARTS CATALOGUE Ordering parts All parts in this parts catalogue are controlled by computer. For prevention of delivery of wrong parts, advise us of the catalogue No., code No., and part name. (Example) Catalogue No. Code No.

  • Page 20: Mower Parts

    −18− 1. Mower parts 65 38 81 80 79 76 84 86 87 53 52 49 50 47 102 37 38  (with groomer) 21・114...
  • Page 21 Code No. Part Name Rmark Code No. Part Name Rmark Ｋ ２ ８ ０ ５ ４ ０ ０ ９ ０ Ｒ cutting cylinder-557 1-36 Ｋ ０ ０ ２ ５ ０ ８ ０ ３ ０ ３ 8 round head square neck bolt 30 Ｌ...
  • Page 22 −20− 1. Mower parts 65 38 81 80 79 76 84 86 87 53 52 49 50 47 102 37 38  (with groomer) 21・114...
  • Page 23 Code No. Part Name Rmark Code No. Part Name Rmark 1-71 Ｌ Ｍ ５ ４ Ｇ Ａ ‐ ０ １ ０ ２ Ｂ Ｒ right-hand frame 1-106 Ｌ Ｍ ５ ４ Ｇ Ａ Ｓ ０ １ ０ ５ Ａ ０ left-hand roller bracket 1-72 Ｌ...

  • Page 24: Drum Wheel Parts

    −22− 2. Drum wheel parts...
  • Page 25 Code No. Part Name Rmark Code No. Part Name Rmark Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ２ ３ ０ Ｂ ０ drum assembly 2-36 Ｋ ０ ０ ０ ６ ０ ８ ０ １ ５ ２ 8 bolt 15S Ｌ...

  • Page 26: Clutch Parts

    −24− 3. Clutch parts...
  • Page 27 Code No. Part Name Rmark Code No. Part Name Rmark Ｋ ６ ９ １ １ ０ ０ ０ ０ ５ ０ engine clutch 3-36 Ｋ ０ ０ ０ ６ ０ ６ ０ １ ５ ２ 6 bolt 15S Ｋ ０ ６ １ ６ ０ ６ ２ ０ ２ ０ bearing 62022NSEC3 3-37 Ｋ...

  • Page 28: Parts Associated With The Frame

    −26− 4. Parts associated with the frame...
  • Page 29 Code No. Part Name Rmark Code No. Part Name Rmark Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ６ ０ １ Ａ ３ left-hand frame 4-36 Ｋ ０ ６ ０ １ ０ ６ ２ ０ ４ ０ bearing 6204C3 Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ６ ０ ３ Ａ ０ large gasket 4-37 Ｋ...
  • Page 30 −28− 4. Parts associated with the frame...
  • Page 31 Code No. Part Name Rmark Code No. Part Name Rmark 4-71 Ｋ ６ １ ８ ０ ０ ０ ０ ０ ９ ０ 18 tooth gear M2 4-72 Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ２ ２ ８ Ｚ ０ right-hand frame no.2 shaft 4-73 Ｌ...

  • Page 32: Mower Transmission Parts

    −30− 5. Mower transmission parts...
  • Page 33 Code No. Part Name Rmark Code No. Part Name Rmark Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ５ １ ３ Ａ ０ gear case assembly 5-36 Ｋ ４ ０ ３ ２ ０ ０ ０ ０ ３ ０ 24 boot 250 Ｌ...

  • Page 34: Handle Parts

    −32− 6. Handle parts 7. Brake parts...
  • Page 35 Code No. Part Name Rmark Code No. Part Name Rmark Ｋ ０ ０ ０ ７ ０ ８ ０ ４ ０ ２ 8 bolt 40SW Ｌ Ｍ ５ ５ Ｇ Ｂ ‐ １ １ ０ １ Ｚ ０ gasket Ｋ ２ ６ ２ ０ ０ ０ ０ ３ ７ ０ Robin EX13D Ｌ...

  • Page 36: Grass Catcher Parts

    −34− 8. Grass catcher parts 9. Tools ・ Option ・ 18, 19...
  • Page 37 6 cross-head tapping screw C-1 pan head 50 Ｌ Ｍ ５ ４ Ｇ ‐ ‐ ０ ８ ２ ３ Ｚ ０ mower attachment piece COMP for LM54GB without groomer Ｋ ４ ８ １ ３ ０ ４ ０ ０ ０ １...

  • Page 38: Groomer / Brush Parts

    −36− 10. Groomer / Brush parts...
  • Page 39 Code No. Part Name Rmark Code No. Part Name Rmark 10-1 Ｌ Ｍ ５ ４ Ｇ Ａ Ｓ １ ２ ０ ９ Ｃ ０ G groomer reel 10-36 Ｋ ５ ０ ０ ０ ０ ８ ０ ０ ０ ２ 8 washer 10-2 Ｌ...

  • Page 40: Maintenance Supplies

    Gel compound #220 1 Can (3.5kg) (K2929002500) (K2929016000) (K2929000500) (6902110) Gel compound #220 1 case (4 Cans) (6902111) EXCELITE EP2 grease (K2931000000)/for bearing BARONESS lacquer spray (400 ml) 2.5kg Can 18kg Can 400g tube Wine red (750301) (K2931002500) (K2931018000) (K2931000400)
  • Page 41 Turf Care Machinery Te l : (0533) 84-1221 1-26, Miyuki-cho, Toyokawa, Fax: (0533) 84-1220 Head Office Aichi-Pref. 442-8530 Japan. SPEC LM54GB - 2005...

This manual is also suitable for:

Lm54gbf

Table of Contents