JAI GO-5000M-PGE User Manual page 51

Cmos digital progressive scan monochrome and monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE:

Table of Contents

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

Multi-Frame

In this mode, the AcquisitionStart command captures the number of frames which are specified by

AcquisitionFrameCount.

Normal Multi-Frame Operation

1. AcquisitionStart command is input

2. AcquisitionTriggerWait becomes effective

3. AcquisitionActive becomes "TRUE" (accepts capture)

4. Output N frames as specified by AcquisitionFrameCount

5. AcquisitionActive becomes "FALSE". Then the output stops. (See the following diagram)

Note: This figure is if the trigger is set to ON. When the trigger is OFF, FrameActive becomes True

at the same timing of AcquisitionActive.

Forcing Acquisition to Stop

While AcquisitionActive is "TRUE", if AcquisitionStop or AcquisitionAbort is initiated, AcquisitionActive

becomes "FALSE" (stop capturing). Once the operation is set to "FALSE", the internal FrameCount is

reset. However, if AcquisitionStop command is initiated during image output period, AcquisitionActive

becomes "FALSE" (stop capturing) after image output is completed. Once, AcquisitionActive becomes

"FALSE", the internal count is reset.

Acquisition Frame Count: Can be set in the range of 1 to 255

- 51 -

Main Functions

Table of Contents

Go-5000m-pge-uv