JAI GO-5000M-PGE User Manual page 52

Cmos digital progressive scan monochrome and monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE:

Table of Contents

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

Continuous

In this mode, when the AcquisitionStart command is set, the image is continuously output at the

current frame rate. This is the default setting for this camera.

Normal Continuous Operation

1. AcquisitionStart command is input

2. AcquisitionTriggerWait becomes effective

3. AcquisitionActive becomes "TRUE"

4. Images begin outputting continuously

5. AcquisitionStop command is sent

6. AcquisitionActive becomes "FALSE". At this moment, the output stops.

However, if AcquisitionStop command is initiated during image output period, AcquisitionActive

becomes "FALSE" (stop capturing) after image output is completed.

Note: This figure is if the trigger is set to ON, and when the trigger is OFF, FrameActive becomes

True at the same timing of AcquisitionActive.

Forcing Acquisition to Stop

If AcquisitionStop is executed and the video is already output when the camera receives the stop

command, AcquisitionActive becomes False (disabling the capture) after the video output is

completed.

- 52 -

Main Functions

Table of Contents

Go-5000m-pge-uv