JAI GO-5000M-PGE User Manual page 38

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Pulse Generator Clear Activation
Set the clear conditions of clear count pulse for the pulse generator.
Pulse Generator Clear Sync Mode
Set the count clear method for the pulse generator. In case of Async Mode, if the clear signal is input
during the length setting value, the counter will stop counting according to the clear signal input. In
case of Sync Mode, if the clear signal is input during the length setting value, the counter will continue
to count until the end of the length setting value and then clear the count. Both modes clear the repeat
count when the counter is cleared.
Counter Clear in Async Mode
Counter Clear in Sync Mode
- 38 -
Main Functions