JAI GO-5000M-PGE User Manual page 84

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Specifications
Blemish Comp.
ALC
Gamma
Dark compression
LUT
HDR
Power supply
Lens mount
Flange back
Optical filter
Operating temperature/Humidity Performance
guaranteed
Storage Temp. / Humidity
Regulation
Housing Dimensions
Weight
Notes:
Note1): Usable performance will be up to 1 second.
l
Note2): A minimum of +12dB of gain can be applied without causing any breaks in the
l
histogram.
Approximately 5 minutes pre-heating is required to achieve these specifications.
l
The above specifications are subject to change without notice.
l
Detect white blemish above the threshold value (Black blemish is
Detection
detected only by factory)
Complement by adjacent pixels (Continuous blemishes are not
Compensation
compensated)
Numbers Up to 512 pixels
AGC and auto exposure can be combined and automatically controlled
γ=0.45, 0.6, 1.0 (3 steps are available)
Choice of Linear or Dark compression ON
OFF: γ=1.0, ON=32 points can be set
4 settings, Level 1, 2, 3 and 4
Input range
6-Pin
Current
Connector
Power Consumption 2.5W (At 12V input, Full pixels) (Typical)
Input range
PoE Current
Power Consumption 3.0W (At 12V input, Full pixels) (Typical)
C mount, Rear protrusion of the lens is less than 10 mm.
17.526 mm, Tolerance: 0 to -0.05 mm
Protection glass: Not provided
-5°C to +45°C / 20 to 80% (No-condensing)
-25°C to +60°C / 20 to 80% (No-condensing)
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE, KC
29 x 29 x 52 mm (W x H x D) (excluding protrusion)
46g
- 84 -
Description
DC+12V to +24V ± 10% (At the input terminal)
190mA ± 20mA (At 12V input, Full pixels)
(Typical)
DC 36 ~ 57V
58mA ±6mA (At 55V input, Full pixels) (Typical)
Miscellaneous