To Save User Settings - JAI GO-5000M-PGE User Manual

Cmos digital progressive scan monochrome and monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE:

Table of Contents

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

To Save User Settings

1. Stop image acquisition.

2. Expand UserSetControl and select the save destination (UserSet1 to UserSet3) in

UserSetSelector.

Note: The factory default setting values are stored in Default and cannot be overwritten.

Caution:

Settings can only be saved when image acquisition on the camera is stopped.

3. Select UserSetSave and click the UserSetSave button.

4. The current setting values are saved as user settings.

- 28 -

Preparation

Table of Contents

Go-5000m-pge-uv