JAI GO-5000M-PGE User Manual page 32

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Action Control
Item
ActionSelector Selects Action 1 or Action 2 for setting the action control values.
Sets the mask value for the selected action signal in a 32-bit register. This value is
compared against the group mask value of the ACTION_CMD message to determine if
ActionGroupMask
the message should be ignored or acted upon. A logical AND operation is used and must
produce a non-zero result or else the message is ignored.
Sets the group key value for the selected action signal in a 32-bit register. This value must
ActionGroupKey match the group_key value of the ACTION_CMD message in order for the message to be
acted upon.
GPIO
This is a general interface for input and output and controls input and output for trigger signals or valid
signals and pulse generator. By using this interface, you can control an external light source, make a
delayed function to input a trigger signal or make a precise exposure control with PWC trigger.
Basic Block Diagram
Description
- 32 -
Main Functions