Table of Contents
Advertisement
3
Front Panel & Interface
Power Cord
Item
Standby button
USB
HDMI IN
HEADPHONE
RS232
AUDIO OUT
SERVICE
LAN
OPS PORT
Description
When the device is on, short press the button to turn off the screen, long press the
button to go into standby mode.
When the screen is off, press the button to open the screen, and when the device is on
standby, press the button to start.
The indicator light displays the state of power on or standby:
• When the device is on, the light is blue.
• When standby, the light is red.
• When the device with OPS module is turned on, the light is green.
Connect USB devices such as hard disks, keyboard, mouse, etc. [5V DC/0.5A]
The front HDMI interface allows digital audio and video signals to be transmitted using
a single cable without compression. HDMI supports multi-channel digital audio, and can
be connected to external devices with HDMI port.
Audio out to Headphones
Serial interface, used for mutual transfer of data between devices
Connect to power amplifier via coaxial port, then connect power amplifier to speaker
For factory commissioning, don't insert any cables
Standard RJ45 Internet connection interface
Port for adding OPS module
OPS
Standby/IR
4
Advertisement
Table of Contents
