Hisense HAIO136 User Manual page 36

LED Cabinets Installation (5×5)
1 Take out the Column 3 LED cabinets. As shown in the figure below, use 16pcs of connecting screws (M6×16)
to fix the 8 connecting blocks to the LED cabinets; then fix 4pcs of M8 wall-mount screws respectively to the
4 connecting blocks at the positions shown in the figure.
Column 1 Column 2
Row E
Row D
Row C
Row B
Row A
Use 4pcs of M6×16 connecting screws for fixation between
Fix 4pcs of M8 wall-mount screws respectively at the posi-
tions shown in the figure.
2 Hang the Column 3 LED cabinets assembled with connecting blocks and wall-mount screws to the fixed wall
bracket (or mobile cart) at the hanging position shown in the figure. Fix 4pcs of M6×25 screws at the posi-
tions shown in the figure.
Place 4pcs of M8 wall-mount screws respectively at the
positions corresponding to the 4pcs of wall bracket
Column 3 Column 4
Connecting blocks
every two LED cabinets
Column 5
When using the wall mount, 4pcs of M6×25 screw should
be fixed at the 4 connecting blocks shown in the figure
31