Table of Contents
Advertisement
4 Find the top side of the mobile cart. Following the direction shown in the figure, insert the mounting tenons
on the left and right pillars into the crossbeams, and then fix the 22pcs of M8×25 set screws and gaskets
connecting these five components (do not tighten them too much for the time being).
Tips: Ask someone to help you, so that the left and right pillars can be installed simultaneously in order to
keep balance. Do not reverse the front side and rear side during installation;
5 Let the mobile cart stand upright; fix the 22pcs of set screws if there is no abnormality.
6 The assembled mobile cart is shown below:
28
Advertisement
Table of Contents
