Hisense HAIO136 User Manual page 35

2 OPS (Optional) and Frame Bezels Assembly
1) Take the OPS packaging box out of the accessories box 1. Fix the 4pcs of M3 stepped screw included in the
packaging box to the front ASSY cover (right) at the positions shown in the figure;
2) Take out the OPS, insert it into the bracket and then tighten the 2pcs of thumb screws. Put the module aside
to avoid dropping or scratch;
3) After assembly of the whole product, connect the assembled OPS module to the corresponding position of
the front ASSY cover (right);
3 Assemble the left and right rear covers of the front ASSY cover: connect the left and right rear covers
together according to the positions shown in the figure, and use 8pcs of GB/T 819.1-2000 M4×8 screws to
fix the covers. Put the assembled front ASSY cover (rear) aside to avoid dropping or scratch;
30