Hisense HAIO136 User Manual page 11

Connect to network
Enter the Settings menu and select the Network item.
WIFI
The device can receive network signals directly through Wireless router
• The available wireless network list is automatically displayed when the WIFI is selected.
• Select an available network, enter the password, and tap Connect. If the selected network is not
encrypted, you can connect directly.
• If the network you want to connect to is not displayed in the list, tap Refresh to display more networks.
If the network you want is still not displayed after this operation, tap Add Network and enter the network
name manually, select the corresponding encryption method according to router settings, enter the
password, and tap Confirm.
Ethernet
Device port
• Ethernet: auto
The device automatically obtains an IP address and connects to the network. If failure, repeat the
operation again or choose Ethernet:manual.
• Ethernet: manual
Manually enter the IP Address, Subnet Mask, DNS Server and Gateway.
Connect to the OPS interface device
OPS (Open Pluggable Specification) is the interface specification developed by INTEL which is applicable
to embedded computer module products. With this interface, the screen can be connected to the device
in compliance with OPS interface specification, which is short for OPS module. You can buy the module
and conduct secondary development in accordance with your requirements. Recommended adaptable
OPS modules is S02BDS5A811E;
This product can provide the OPS module with 19V±0.5V (3.4A MAX) power supply.
NOTE
It is recommended to choose and purchase OPS computers with the i3/i5/i7 latest generation processor,
4G memory, 128 GB solid state drive or above.
You should purchase the OPS module which is applicable to the size of the device OPS. The size of OPS
refers to the following figure:
Wireless router
Network port
Router
Network port output
Network port
in the wall
Network port input
6
Network port
in the wall