Making Connections - Hisense HAIO136 User Manual

4

Making Connections

Connect to USB interface device
The total current of all the USB output ports of the device when connected to external devices at the
same time mustn't exceed 1000mA, or else the device failure caused by overcurrent isn't covered by the
warranty.
Device port
NOTE
This device is connected to wireless keyboard and mouse devices. If there is any insensitivity
phenomenon during use, you can try to change the wireless receiver to another USB port, or use a USB
extension cord to connect the wireless receiver in order to enhance the receiving range.
Connect to HDMI input
Connect the HDMI input connector of the device to the HDMI output port of an external device.
Device port
NOTE
The supported signal formats of the HDMI port refer to Specifications.
Connect to external audio device
Audio output: connect to power amplifier via coaxial port, then connect power amplifer to speaker.
Device port
External device
Power amplifier
Connect power amplifier to speaker
5
Set-top box/player/PC/DVD
HDMI
HDMI out
Speaker
Coaxial port