Lid; Lid Release; Lid Lock - Hermle Z 216 M User Manual

Table of Contents

OPERATION

2.2 Lid

After the run, properly close the lid of the centrifuge, appearing in the display, "rpm/rcf"(A-1) with the

word, "close" (M1). If there is a rotor in the centrifuge, the word, "rotor" (M3) appears, as well as the

code number of the specified rotor, which is in the centrifuge, for example "220.72" (M4). If there is

no rotor in the centrifuge, it flashes the word, "rotor" (M3) and an additional word, "no" (M4). ). By

pressing the key, "lid" (7), the lid of centrifuge can be released. As soon as the electromagnetic lid is

completely released, the word, "open" (M2) appears. The lid of the centrifuge is now able to be

opened.

For all number marked text, please refer to Figure 15.

Figure 15

During the run, you can retrieve the rotor type at any time, by pressing the key, "lid" (7).

The lid must only be closed slightly. An electromagnetic lid lock closes the lid, the word "open" (M2)

will no longer be displayed.

As a sign that the centrifuge is ready for starting, appearing in the display, "rpm/rcf"(A-1), the word

"close" (M1). Simultaneously, the word "rotor" (M3) appears, as well as the code number of the

rotor, which is in the centrifuge, i. e. "nr 22x.xx" (M4), along with all rotor specific data, for example:

max. speed, acceleration etc., are available.

For all number marked text, please refer to Figure 17.

ATTENTION: Don't grip your fingers between the lid and the device or the locking

mechanism, when closing the lid!

Z216M_V2.21_eng

Table of Contents