Manual Release In Case Of Electric Failure - Paravan PR heavy duty User Manual

15.9.6

Manual release in case of electric failure

A manual emergency release is located at the front edge of the
docking station.
> Move wheelchair forward to remove the pressure on the lock pin
and push the red release arm to one side and hold it there while the
wheelchair moves away.
> A cable-activated manual operating lever can also be fitted
(accessory). The red release arm is also pushed to one side and
should be held there whilst the wheelchair moves away.
If the described manual release procedures fails, an emergency
release tool made from red plastic comes with each docking station.
> Move wheelchair forward to remove the pressure on the lock pin
> Place the emergency release tool in the gap between the locking
plate and the docking station.
> Push the release tool and wheelchair forward until the locking pin
has been forced down - after which the wheelchair can reverse out
of the docking station.
> Please also refer to Dahl Engineering instructions for installa-
tion, use and maintenance for Dahl Docking Station MK II and
VarioDock™ systems.
92
Fig. 52: Manual release step 1
Fig. 53: Manual release step 2
Loading and transporting your electric wheelchair